Local guide
Commercial Roofing Contractors in Burnet: what to know
Hail, wind and the Burnet storm season
Texas sees more damaging hail than almost anywhere in the country, and buildings around Burnet sit squarely in that
pattern. On commercial roofs the damage is rarely obvious: hail fractures insulation and bruises membrane without
opening it, so the roof stays watertight through the storm and starts leaking a season later. Wind failures, by
contrast, start at the perimeter, edge metal and coping lift first, then the field peels. Both are worth documenting
promptly after any significant storm passes over Burnet County.
Energy code and reflectivity
Energy code adopted across Texas includes prescriptive requirements for low-slope commercial roofs in this climate
zone, including minimum insulation values and, in many cases, solar reflectance criteria for the roof surface. In
practice that is why so many replacement roofs in Burnet go on white and why simply recovering an old roof without
addressing insulation may not satisfy a plans reviewer. Any competent contractor will raise this before the scope is
written, not after the permit is refused.
How to compare commercial roofing quotes in Burnet
Commercial bids are only comparable when they describe the same scope. Ask every contractor bidding a Burnet building
for the same five things: the exact system and membrane thickness proposed with manufacturer and product name; how
much wet insulation is included for removal and what happens if more is found; how the perimeter, curbs and
penetrations will be detailed; what warranty is offered, by whom, and what it excludes; and how tear-off, disposal,
crane or lift access and rooftop equipment coordination are handled. A one-page total price is not a bid, it is a
number.
- Get the scope in writing, system, thickness, insulation, attachment method, flashing details.
- Ask what is excluded, deck replacement, wet insulation beyond an allowance, mechanical disconnects.
- Separate emergency work from permanent repair so mitigation can be invoiced and claimed cleanly.
- Verify insurance, general liability and workers' compensation certificates, current, in your name.
- Never pay a large deposit for materials that have not been delivered to your site.
We do not perform roofing work and we do not rank contractors by who pays us for placement. This directory exists to
put more than one qualified local option in front of you so the comparison is real.
$4–$12Typical installed cost per sq ft, commercial low-slope (industry range)
15–30 yrsTypical service life of a well-maintained single-ply system
24/7Emergency request line
$0Cost to compare quotes, no obligation
